Full Shrink Type EVA Outer Tube 60mm Length Single Fiber Optic Heat Shrink Tube
Description:
The Single Fiber Optic Heat Shrink Tube is widely used in communication optical fiber equipment such as optical fiber splice box, optical fiber terminal box, optical fiber distribution box, optical fiber transfer box, etc.
A Single Fiber Optic Heat Shrink Tube is consisted of cross linked polyolefin, hot melt tubes and stainless reinforcing steel rod which keep optic transmission properties of optical fiber and enhance the protection to optical fiber splices. It is friendly operated to the optic fiber during installation without damaged and micro bending.
It can protect the spliced fiber from being break down and unwanted bending and is coated with the plastic tube. It gives to the installer flexibility while using the spliced fibers during installation. Focus Infra offers all kinds of Single Fiber Optic Heat Shrink Tube which is fitted to the sleeve holders that are generally exist in fiber optic trays.
A Full Shrink Type Single Fiber Optic Heat shrink Tube is consisted of outer high quality irradiation cross-linked polyolefin heat shrinkable tubing provides an instant shrink-force and drives the adhesive liner into all areas of the splice and excludes all the air.
Features:
1. Protect single or mass fusion splices
2. Fits into most splice holders
3. Quick shrink-down time
4. Low temperature hot-melt adhesive encapsulates the splice
5. Quickly shrink, improving work efficiency
6. extend the service life of the fiber
7. No air bubbles, no fiber breakage
8. Selected 304 high-quality stainless steel, not easy to rust, corrosion-resistant, and anti-aging
Technical Parameters:
| Specification | Test method | Typical data |
| Tensile strength(MPa) | ASTM D 2671 | 18 |
| Elongation at Break (%) | ASTM D 2671 | 700 |
| Density(g/cm2) | ISO R1183D | 0.94 |
| Dielectric strength (KV/mm) | IEC 243 | 20 |
| Permittivity | IEC 243 | 2.5 |
| Length rate of change (%) | ASTM D 2671 | +5 |
